RESIDENTIAL SERVICES · LEXINGTON, KY

Spray Foam Insulation in Lexington, KY

Spray Foam Insulation Contractors in Lexington

Spray foam is the highest-performing insulation we install, and for many Lexington homes it is the best way to solve comfort problems that other materials cannot. It goes on as a liquid, expands in seconds and fills every gap, crack and cavity it touches. That means it insulates and air-seals in a single step, which is something batts and loose-fill alone cannot do.

Reed’s Home Solutions installs spray foam insulation throughout Lexington, KY and the surrounding Central Kentucky communities. We start with a free inspection, explain which kind of foam fits each area of your home and give you an upfront price before any work begins. Insulation can lower heating and cooling costs by up to 15%.

Central Kentucky’s mix of humid summers and cold winters is hard on older homes. Spray foam is especially useful in the places where air leakage and moisture do the most damage, including attics, crawl spaces, basements and rim joists.

Closed-cell foam

Crawl spaces, basements, rim joists, roof decks

Open-cell foam

Interior walls and attic roof decks where moisture is not a concern

Choosing the Right Spray Foam for Your Lexington Home

Closed-cell spray foam is the denser, more rigid option, and it delivers the most insulation per inch. Because it does not absorb water and acts as a vapor barrier, it is the right choice for crawl spaces, basements, rim joists and anywhere moisture can be an issue. It also adds a measure of rigidity to the surface it is applied to.

Open-cell spray foam is lighter and softer, with a lower R-value per inch. It fills and seals cavities well and works in interior walls and attic roof decks where moisture is not a concern.

Many homes use both. We might use closed-cell foam on the crawl space walls and rim joist and open-cell foam on an attic roof deck, for example. Your inspection tells us which makes sense where, and we explain the choice before you decide.

Where to Insulate With Spray Foam in Your Lexington Home

Spray foam works in nearly every part of the house. These are the places we install it most often.

Attics and Roof Decks

Seals the roofline and turns the attic into part of the conditioned space, which helps rooms under the roof stay comfortable.

Crawl Spaces

Closed-cell foam on the walls, paired with a sealed vapor barrier on the ground, keeps moisture out and floors warmer.

Basements and Rim Joists

Seals the rim joist, one of the largest sources of air leakage in the house, and insulates foundation walls.

Walls and Garages

Open walls, garage framing and new construction benefit from the air-sealing that spray foam provides.

New Construction

Spray foam in walls and roof decks creates a tight thermal envelope from day one.

Benefits of Spray Foam Insulation

Here is what spray foam does that other insulation cannot.

Insulates and air-seals in one step. It fills gaps and cracks that let conditioned air escape.
Highest R-value per inch. Closed-cell foam delivers roughly R-6 to 7 per inch, which matters in spaces with limited depth.
Resists moisture. Closed-cell foam does not absorb water and acts as a vapor barrier.
Lower energy bills. Spray foam can lower heating and cooling costs by up to 15%.
Better comfort. Fewer drafts and more even temperatures from room to room.
Quieter home. A sealed envelope reduces outside noise.

Spray Foam Insulation Near Lexington

Our crews install spray foam throughout Central Kentucky from our office in Versailles. If you live outside Lexington proper, we serve your area too, including Versailles, Nicholasville, Georgetown, Richmond, Winchester, Paris and Lawrenceburg.

Searching for spray foam insulation near me? Start with a free inspection and estimate from a local team that handles insulation, waterproofing and foundation work under one roof.

Why Spray Foam Makes Sense for Lexington's Climate

Lexington has hot, humid summers and cold, wet winters, and a house has to handle both. In summer, the roof and walls heat up, humid air leaks in through gaps and your air conditioner works overtime. In winter, warm air escapes through the attic and the rim joist while cold air gets in around the foundation.

Spray foam addresses both problems because it seals air leaks as it insulates. Closed-cell foam also resists moisture, which matters in crawl spaces and basements where humid air and damp surfaces meet. The rim joist is one of the largest sources of air leakage in the entire house, and foam is the most effective way to seal it.

For homeowners across Fayette County and the surrounding Central Kentucky towns, that combination is why spray foam is our recommendation for the leakiest and most moisture-prone parts of a house.

How We Install Spray Foam Insulation

Spray foam goes in best when the space is prepared and the conditions are right. Here is the process.

Inspection and assessment

We look at the space, check for moisture, air leaks and structural issues and measure what is already there. We explain which type of foam fits.

Preparation

We protect floors, furniture and surfaces we are not insulating, and prepare the area. If there is old insulation or moisture to deal with, we handle it first.

Temperature and environment control

Spray foam bonds and cures best when surfaces are within the temperature range the material requires, so we check conditions before we spray.

Application and inspection

Our crew applies the foam in the thickness we agreed on, then inspects coverage and cleans up. We walk you through what we installed.

Signs Spray Foam Is the Right Fit for Your Home

Spray foam is not for every project, but it is the best answer to these problems.

A drafty attic or an upstairs that is much hotter than the rest of the house.
Cold floors over a crawl space or a musty smell coming from below.
A basement with cold walls, condensation or leaky rim joists.
Vaulted ceilings or finished attic spaces where there is no room to blow insulation across a floor.
New construction where you want a tight, high-performance envelope from the start.
Insulation that has failed because of moisture, such as wet or moldy batts.

Spray Foam vs. Blown-In vs. Batt

Here is how spray foam compares with our other insulation types.

Spray foam

Batt

Open framing

Schedule Your Free Home Energy Audit in Lexington

We inspect your attic, crawl space, basement and walls, show you where you are losing energy and recommend the right spray foam for each area, with an upfront price.

Recent Spray Foam Project Near Lexington

In Paris, KY, we insulated an entire newly built home and its garage with spray foam, from the roof deck to the walls, creating a seamless thermal envelope. See the roof deck, attic and wall photos on the project page.

Proven by Results, Recognized for Excellence

Ann Matics

Tyler and his crew were awesome. They blocked off as much of the dust as... Read More »

Empower Athletics

Wow!! They booked it for two days to get the job done, Jack hammered the... Read More »

Deborah Collado

We recently requested an evaluation of our foundation and crawl space through Reed's Home Solutions.... Read More »

Tara Stacy

John Lucas was our project manager! He was incredibly kind and VERY knowledgeable. His communication... Read More »

Michelle M

Tyler Caudill and his crew did an amazing job saving my house and giving me... Read More »

Spray Foam Insulation FAQs for Lexington Homeowners

How much does spray foam insulation cost in Lexington?

Cost depends on the type of foam, the area and how much prep work is needed. Spray foam typically costs more per square foot than blown-in or batt, but it also air-seals, so it can replace more than one step. We give you an exact price after a free inspection.

Is spray foam better than fiberglass or blown-in insulation?

It depends on the space. Spray foam delivers the highest R-value per inch and air-seals, which makes it the best choice for attics with leaks, crawl spaces, rim joists and basements. Blown-in and batt are good, cost-effective options in the right places.

What is the difference between open-cell and closed-cell spray foam?

Closed-cell foam is dense, delivers roughly R-6 to 7 per inch, does not absorb water and acts as a vapor barrier. Open-cell foam is lighter and softer at about R-3.5 to 3.6 per inch. We explain which fits each part of your home.

Will spray foam lower my energy bills?

Yes. Spray foam can lower heating and cooling costs by up to 15%.

Can spray foam be installed in an existing home?

Yes. We install spray foam in attics, crawl spaces, basements and open walls in existing homes.

Is spray foam safe for my family?

Spray foam is installed by trained crews, and we manage the work area during installation. We explain what to expect, including how long to stay out of the work area, before we start.

Do you offer financing for spray foam insulation?

Yes. We offer flexible financing options. Ask about them during your free estimate, or see our financing page.

How long does spray foam insulation take to install?

It depends on the size of the area and the prep work needed. We give you a timeline with your estimate.

Can spray foam help with moisture and mold in my crawl space or basement?

Closed-cell foam does not absorb water and acts as a vapor barrier, which helps control moisture. If you already have active moisture or mold, we recommend addressing the source first, and our team handles crawl space repair, basement waterproofing and mold remediation.

Where does Reed's install spray foam?

We install spray foam in attics, roof decks, crawl spaces, basements, rim joists, walls and garages across Lexington and Central Kentucky.

Areas We Serve

Reed’s Home Solutions installs spray foam insulation in Lexington and throughout Central Kentucky.