Home Insulation Services in Charleston, WV
Insulation Charleston WV Homeowners Can Count On
When the heating bill spikes in January, the air conditioner never quits in July, or one room always feels different from the rest of the house, poor insulation is a likely culprit. Reed’s Home Solutions is an insulation company in Charleston, WV, and has been Charleston’s trusted foundation repair and insulation company since 1989. Our crews work with spray foam, cellulose and fiberglass blown-in, and fiberglass batts, and every project begins with a free, no-obligation inspection so the material you get is chosen for your home rather than pulled off a standard menu.
Houses in the Kanawha Valley take a beating from the weather. Summers are hot and sticky with river-valley humidity, winters are cold, and heavy rain keeps moisture pressure on basements and crawl spaces. Add hillside lots, garages tucked under living areas and rooms built out over open air, and you get plenty of places where heat and damp air find a way in. Good insulation installation treats the house as one system, from the roofline down to the footings, instead of a single fix in a single room.
Our West Virginia regional office in Williamson supports crews working across the Charleston area and beyond. Insulation is only part of what we do, so if an inspection turns up a damp wall or a sagging floor, we can help with basement waterproofing in Charleston, crawl space repair or foundation repair without sending you off to find another contractor.
Insulation Services for Every Part of Your House
If you are not sure what to ask for, begin with the place that bothers you most. Each part of a Charleston house behaves differently, and during your free inspection we pick the material that suits that space.
Attic Insulation
Heat leaves through the top of the house first, which makes attic insulation the usual starting point. It steadies indoor temperatures through humid summers and cold winters, and roof decks and vaulted ceilings are on our list too.
Crawl Space Insulation
Pairs with crawl space repair to keep damp air, mold and chilly floors from getting a foothold. We can also insulate the floor system above the crawl space.
Basement Insulation
Wall, ceiling and rim joist insulation holds heat in below grade and goes well with our Charleston basement waterproofing work.
Wall & Garage Insulation
For finished exterior walls that are empty or thinly filled, and for garages and cantilevers beneath living space. The work is done from the outside or through small holes, so the drywall stays put.
Spray Foam, Blown-In and Batt Insulation Compared
Any area of the house can be done with one of three materials. Here is what separates them.
Spray Foam Insulation
Spray foam has the highest R-value per inch of anything we install, with closed-cell near R-6 to R-7 and open-cell near R-3.5 to R-3.6. It expands into cracks and cavities, so one application insulates and air-seals. We lean on it for rim joists, crawl spaces, leaky attics and any spot where humid air or moisture is the real problem.
Blown-In Insulation
Cellulose or fiberglass loose-fill is blown into attics and closed wall cavities through small openings, and lands between R-3.2 and R-3.8 per inch. It reaches tight corners and finished walls without demolition, which makes it a practical way to bring an older, thin-on-insulation house up to date.
Batt Insulation
Pre-cut fiberglass or mineral wool batts sit snugly between studs, joists and rafters and range from R-3.0 to R-4.3 per inch. They are a sensible, budget-friendly pick for new framing, remodels and any cavity we can get at directly.
Choosing the Right Insulation for Your Charleston Home
Few houses end up with just one material. This table shows how we typically pair a product with a space.
Location in the house
Our usual pick
Reason
Location in the house
Leaky attic or overheated upstairs rooms
Our usual pick
Spray foam
Reason
Stops air leaks and insulates in a single pass
Location in the house
Thin attic insulation that needs more depth
Our usual pick
Blown-in
Reason
Flows around joists and can sit on top of dry existing material
Location in the house
Open attic floor, budget-minded project
Our usual pick
Batt
Reason
Quick and economical when the framing is exposed
Location in the house
Crawl space
Our usual pick
Spray foam on the walls plus a sealed vapor barrier
Reason
Tackles damp air and drafts together
Location in the house
Basement walls and rim joists
Our usual pick
Spray foam
Reason
Closed-cell foam resists water absorption
Location in the house
Finished exterior walls
Our usual pick
Dense-packed blown-in
Reason
Installed through small holes, no drywall tear-out
Location in the house
Garage or cantilever under living space
Our usual pick
Spray foam or blown-in
Reason
Reduces heat flow and noise into the rooms above
Why Charleston Homeowners Hire Reed's for Insulation
- Decades of local experience — we have served Charleston since 1989 and know how valley humidity, hillside lots and older construction affect a house.
- Clear, upfront estimates — each estimate follows a real inspection, explains why a material fits, and gives you a price before any work begins.
- Warranties and financing — dependable, transferable warranties, plus flexible financing so a well-insulated home does not have to wait for a lump sum.
Insulation and Moisture Control From One Contractor
A damp basement, a musty crawl space or a settling wall can undermine even the best insulation. When we spot signs of trouble, we tell you, and the same company can take care of basement waterproofing, crawl space repair or foundation repair as well.
What to Expect When You Hire Reed's in Charleston
From the first call to the last cleanup, the path is the same for a roofline, a crawl space or a stud wall.
Free inspection
We go through your attic, then the crawl space or basement, the exterior walls and the garage, measure whatever insulation is in place and check for drafts and moisture. Everything we find, we show you.
Your options and a firm price
We talk through which material belongs in each area and why, and you have a price in hand before work starts. Flexible financing is available if you want it.
Installation
The crew prepares the space, protects your home and installs the insulation. Attic, wall and garage jobs usually wrap up within one day, while bigger or more complicated projects are scheduled with you when you get your estimate.
Proven by Results, Recognized for Excellence
Ready to Cut Energy Bills in Your Charleston Home?
Wondering where your home is losing energy? A free inspection pinpoints it before you spend anything on upgrades. We can also look at your attic against the ENERGY STAR targets and walk you through which of our seven insulation services fits your house.
Insulation Questions From Charleston Homeowners
What does insulation installation cost in Charleston?
Your price is shaped by the material, how many square feet we are covering and how much prep the space needs. Foam generally runs higher per square foot than loose-fill or batts, yet it blocks drafts too, so it can take the place of a separate air-sealing step. Once the free inspection is done, you get an itemized written price ahead of any work.
Which type of insulation should I choose?
That comes down to the space. Spray foam suits crawl spaces, rim joists and leaky attics where air and moisture are the trouble. Blown-in is ideal for adding depth to an attic floor or filling finished walls without tearing out drywall. Batt fits open framing and new construction. We settle the question during your inspection.
How can I tell if my house needs more insulation?
Watch for high bills, rooms that stay too hot or too cold, drafts, cold floors above a crawl space and an upstairs that runs much warmer than the main floor. For Charleston, which ENERGY STAR places in climate zone 4, the target is R-60 for a bare attic and R-49 when 3 to 4 inches are already up there. West Virginia’s energy code lists R-49 for attics in the same zone, and you can read it in the West Virginia energy code summary. We measure your current level and show you the gap.
Will new insulation really lower my energy bills?
Yes. When less conditioned air escapes, your furnace and air conditioner run less. Expect up to 15% lower heating and cooling costs, and a more comfortable house almost right away.
How long will the work take?
Plan on about a day for an attic, a set of walls or a garage. Crawl spaces, basements and big houses can run longer, and the schedule is spelled out in your estimate.
Can new insulation go over the old?
Frequently it can. In an attic, blown-in material can often be added over existing fiberglass or cellulose as long as it is dry and in decent condition. Wet, moldy or damaged insulation has to be removed first, and we will let you know during the inspection.
Which areas around Charleston do you serve?
We serve Charleston, South Charleston, St. Albans, Dunbar, Nitro, Cross Lanes, Teays Valley, Hurricane and Barboursville, along with Huntington, Beckley and Williamson. Not on the list? Check our service areas page or contact us.
Is financing available for insulation work?
It is. Payment plans are available for insulation work, so bring it up at your free estimate or look over the details on our financing page.
Areas We Serve
From South Charleston to the Kanawha Valley and beyond, our insulation crews are a phone call away.