Welcome to Reed’s Home Solutions

RESIDENTIAL SERVICES · KNOXVILLE, TN

Home Insulation Services in Knoxville, TN

Insulation Knoxville TN Homeowners Can Rely On

If your heating bill jumps every January or one bedroom never matches the rest of the house, the insulation deserves a close look. Reed’s Home Solutions installs insulation in Knoxville, TN using open- and closed-cell spray foam, loose-fill cellulose or fiberglass, and fiberglass batts. Your project begins with a free, no-obligation inspection. From there we pick a product for each space instead of working from a fixed menu.

East Tennessee asks a lot of a house. Long humid summers, sudden cold snaps and downpours that push damp air into basements and crawl spaces all add up. Hilly lots bring walkout basements and garages under living space, and many homes have rooms built out over open air. Because each spot lets heat and moisture through differently, we plan the whole house together, top to bottom.

Our East Tennessee regional office in Surgoinsville supports the crews serving Knoxville and the towns around it. If the inspection uncovers a wet basement wall, a damp crawl space or a shifting foundation, we can handle basement waterproofing in Knoxville, crawl space repair or foundation repair.

Insulation Services for Every Part of Your Knoxville House

Not sure what to ask for? Begin where the discomfort is worst. Rooms and spaces respond differently to heat, cold and moisture, so we choose the material space by space.

Attic & Roof Insulation

Warm air heads for the top of the house, so the attic is usually the first stop. We also handle roof insulation on the underside of the roof deck and in vaulted ceilings.

Crawl Space & Floor Insulation

We insulate crawl space walls or add floor insulation under living space, depending on how the crawl space is built.

Basement Insulation

Walls, ceilings and rim joists in a basement or walkout level all lose heat. Insulation for a basement in Knoxville works best once moisture is under control.

Wall & Garage Insulation

For finished walls with little inside them, plus garage walls and ceilings, rooms over garages and cantilevers. Most of it goes in through small openings, leaving the drywall intact.

Spray Foam, Blown-In and Fiberglass Batt Insulation Compared

Any space in your home can be handled with one of three materials. This is how they differ.

Spray Foam Insulation

Foam packs the most R-value into each inch, about R-6 to 7 for closed-cell and about R-3.5 to 3.6 for open-cell. One pass insulates and seals air leaks, the main benefit of spray foam insulation. Residential spray foam insulation in Knoxville suits rim joists, roof decks and any spot where humid air is the problem.

Blown-In Insulation

Blown-in insulation is loose cellulose or fiberglass delivered by hose into attics and closed wall cavities. Expect roughly R-3.2 to 3.8 for every inch. Because no demolition is needed, a thinly insulated house can be upgraded with little disruption.

Batts

These are panels of fiberglass or mineral wool, cut to fit between studs, joists and rafters, with R-values near 3.0 to 4.3 per inch. For exposed framing and remodels, fiberglass batt insulation keeps costs down.

Choosing the Right Insulation for Your Knoxville Home

Most houses end up with more than one product. Here is how we usually match material to location.

Where in the house

Our usual pick

Reason

Where in the house

Drafty attic or hot upper-floor rooms

Our usual pick

Spray foam

Reason

Seals air leaks and insulates in one step

Where in the house

Attic that needs more depth

Our usual pick

Blown-in

Reason

Flows around framing and can go over dry existing material

Where in the house

Open attic floor on a tight budget

Our usual pick

Batt

Reason

Fast and economical when the joists are exposed

Where in the house

Roof deck or vaulted ceiling (roof insulation)

Our usual pick

Spray foam

Reason

Works against the underside of the roof where batts struggle

Where in the house

Crawl space walls or floor (floor insulation)

Our usual pick

Spray foam or batt

Reason

Foam handles damp air, batts suit a dry floor system

Where in the house

Basement walls, ceilings and rim joists

Our usual pick

Spray foam

Reason

Closed-cell foam stays put when conditions get damp

Where in the house

Finished exterior walls

Our usual pick

Dense-packed blown-in

Reason

Goes in through small holes with no drywall tear-out

Where in the house

Garage walls, ceilings or cantilevers

Our usual pick

Spray foam or blown-in

Reason

Cuts heat flow and noise into rooms above and beside

Existing wall insulation process

Insulation for Old Homes in Knoxville

Older neighborhoods around Knoxville have houses built long before today’s energy standards. Walls may hold very little, attic insulation may have thinned out, and a floor over a crawl space may have nothing under it. Insulation for old homes in Knoxville has to work around the house you have.

We favor methods that leave finished surfaces alone. Dense-packed walls are filled through small openings, and an attic can often get new blown-in insulation over what is already there when it is dry and in decent shape. We also check for damp spots, damaged material and gaps around chimneys and pipes first.

Commercial and Metal Building Insulation Across East Tennessee

Shops, warehouses and metal buildings have different needs from a house. Large roofs, exposed steel and condensation on cold surfaces drive up energy bills, and spray foam is often the answer because it adheres to metal and seals as it insulates. For a property rather than a home, see our commercial spray foam insulation service.

Why Knoxville Homeowners Hire Reed's for Insulation

Insulation and Moisture Control Under One Roof

A wet basement, a musty crawl space or a cracked wall can undercut even the best insulation. When we see warning signs, we say so, and the same company can address mold, waterproofing or foundation trouble too.

What to Expect When You Hire Reed's in Knoxville

The process stays the same whether the project is a roof deck, a crawl space or a set of walls.

1

Free inspection

We start in the attic and work down through the crawl space or basement, the walls and the garage. Along the way we measure existing insulation, hunt for drafts and moisture, and show you what turns up.

2

Your options and price

Next comes a conversation about where each material belongs and the reasoning behind it. The price arrives in writing ahead of any work, and flexible financing is available if it helps.

3

Installation

Your home is protected before the crew begins. A typical attic, wall or garage job wraps up the same day, and bigger projects get a schedule built with you.

Proven by Results, Recognized for Excellence

Ready to Lower Energy Bills in Your Knoxville Home?

Curious where your house is wasting energy? The free inspection shows where energy is escaping, and it costs you nothing. We can also compare your attic with the ENERGY STAR targets and explain which of our seven insulation services fits best.

Insulation Questions From Knoxville Homeowners

Insulation cost depends on the material, the square footage and how much prep the area needs. Foam usually costs more per square foot than loose-fill or batts but also seals air leaks. An itemized written estimate follows the free inspection, before any installation starts.

It depends on the space. Spray foam fits crawl spaces, rim joists, roof decks and leaky attics where air and moisture cause the trouble. Blown-in adds depth to an attic floor or fills finished walls without tearing out drywall. Batts suit open framing and remodels.

Watch for cold floors above a crawl space, drafts, rooms that run hot or cold, high energy bills, and a second story that runs far warmer than downstairs. ENERGY STAR puts Knoxville in climate zone 4, and its recommended R-values are R-60 for an attic with no insulation and R-49 for one with 3 to 4 inches in place. We measure what you have and show you the gap.

Knox County enforces the 2018 IRC as amended, and its energy requirements list R-38 for ceilings (R-30 with an energy truss), R-13 for wood-frame walls, R-19 for floors, and R-10 continuous or R-13 cavity for basement walls and unvented crawl space walls.

Yes. Furnaces and air conditioners cycle less once conditioned air stays inside. Savings can reach as much as 15% off heating and cooling, and rooms tend to feel steadier almost immediately.

Yes. Roof insulation means spray foam on the underside of the roof deck or in vaulted ceilings, and floor insulation means treating the subfloor above a crawl space or other unheated area.

A single day covers most attic, wall and garage jobs. Larger houses, basements and crawl spaces tend to run longer, and the estimate spells out the timeline.

Frequently. A dry, sound layer of fiberglass or cellulose in the attic can stay, with new blown-in added on top. Anything wet, moldy or damaged is removed first, and the inspection tells us which case you have.

We serve Knoxville, Farragut, Maryville, Oak Ridge, Sevierville, Clinton and Jefferson City, plus Alcoa, Powell, Lenoir City, Loudon, Seymour, Kodak, Strawberry Plains, Pigeon Forge and Gatlinburg. If your town is missing, the service areas page has the full list, or reach out and ask.

Yes, payment plans cover insulation projects. Details are on the financing page, and your estimator can go over them during the free visit.

Areas We Serve

From Farragut to Sevierville and across East Tennessee, our insulation crews are a phone call away.

Scroll to Top